120 offers for

Abrasive discs cutting-edge pro spec

Refine search
Price
< £8
From £8 to £10
From £10 to £20
> £20
From £   to £
About
25mm wide ratchet operated tie-down strap clamp Length 5m. 4in x 1in Loosefold (unstitched) buff for use with the blue. Standard red finish with fixed metal spout. High temperature resistant, silicone impregnated glass fibre sleeving ideal for protecting against radial heat. For removing nails from timber Substantial handle length for good leverage Broad head spreads the load PVC sleeved handles. Regular file cleaning prevents clogging and improves performance Fine gauge wire face impregnated onto strong backing Wooden block is easy to hold and use. Twin cutters for accuracy and clean cut Suitable for cordless and hand drills Special design means they do not require a drill stand Ground in one piece for strength 1/4" quick change shank Available for 6,8 and 10mm plug sizes. For preparation and between coats sanding of contoured surfaces.
Sorted by   
120 identified offers.
Cutting Edge [Pike & Co. Branded] C4 Pro Sealant Gun 400ml - Min 3yr Warranty

Cutting edge - Cutting Edge [Pike & Co. Branded] C4 Pro Sealant Gun 400ml - Min 3yr Warranty

26.11
Sturdy skeleton gun with hexagonal rod, re-inforced ring and hook end. Minimum 3yr Manufacturer Warranty (Registration Card Included).
Usually dispatched within 4-5 business days
Available at Amazon.co.uk
Cutting Edge [Pike & Co. Branded] Power Pro Sealant Gun - Min 3yr Warranty

Cutting edge - Cutting Edge [Pike & Co. Branded] Power Pro Sealant Gun - Min 3yr Warranty

56.67
The Everbuild EVBSGNPOWER is the ultimate heavy-duty sealant gun with extra pull trigger, hook end and swivel action barrel for both 310ml and 400ml cartridges and is ideal for all sealant applications. Minimum 3yr Manufacturer Warranty (Registration Card Included).
Usually dispatched within 4-5 business days
Available at Amazon.co.uk
Cutting Edge [Pike & Co. Branded] Cox Easiflow HD 400ml Pro Sealant Gun - Min 3yr Warranty

Cutting edge - Cutting Edge [Pike & Co. Branded] Cox Easiflow HD 400ml Pro Sealant Gun - Min 3yr Warranty

25.93
Patented pressure relief device. Powerful trigger action. Case hardened clutch plate. Minimum 3yr Manufacturer Warranty (Registration Card Included). Low cost applicator for the professional tradesman or discerning DIY enthusiast for semi-frequent applications.
Usually dispatched within 4-5 business days
Available at Amazon.co.uk
Cutting-Edge Piggies Braces

Cutting-edge pro spec - Cutting-Edge Piggies Braces

10.99
Heavy duty elasticated braces Wide comfortable straps Leather reinforced cross over Extra strong clips Fully adjustable. - Minimum 3year Manufacturer Warranty (Registration card Included) Pike & Co. A British owned and operated Tool & Electronics importer and manufacturing company
Usually dispatched within 1-2 business days
Available at Amazon.co.uk
Cutting Edge Abrasive Discs Velcro [Pike & Co® Branded]- Min 3yr Warranty

Cutting edge - Cutting Edge Abrasive Discs Velcro [Pike & Co® Branded]- Min 3yr Warranty

12.49
- Excellent for woodworking Type: Velcro - Size: 25 mm - Grade P60 Minimum 3yr Manufacturer Warranty (Registration Card Included). 25 mm P120 to suit spindle pads FLE48105 (Hard face), FLE48205 (Soft face). Ideal for intricate sanding applications. Quality hook and loop abrasive disc.
Usually dispatched within 4-5 business days
Available at Amazon.co.uk
PKE Cutting Edge BQ026 Cutters For Art26

Cutting edge - PKE Cutting Edge BQ026 Cutters For Art26

4.48
Minimum 3yr Manufacturer Warranty (Registration Card Included). Plastic Blades to fit Bosch ART26LI, ART26 Accutrim, ART26 EasyTrim Accutrim.
Usually dispatched within 1-2 business days
Available at Amazon.co.uk
Cutting-Edge EPCOS PRO-SPEC - B66424B2000 - RETAINING CLIP, EFD30 - (Pack of 1) --

Pro-10 - Cutting-Edge EPCOS PRO-SPEC - B66424B2000 - RETAINING CLIP, EFD30 - (Pack of 1) --

7.77
6mm 'Further Manufacturer's Details (for this range)Material Grade N87. 3mm External Length / Height: 6. 65mm External Width: 30. 6mm Length: 30. RETAINING CLIP, EFD30 Clip Style: Retaining Clip External Depth: 8.
Usually dispatched within 2-3 business days
Available at Amazon.co.uk
Cutting-Edge EPCOS PRO-SPEC - B66364W1016T1 - FORMER, ETD39, 16PIN - (Pack of 1) --

Pro-10 - Cutting-Edge EPCOS PRO-SPEC - B66364W1016T1 - FORMER, ETD39, 16PIN - (Pack of 1) --

8.77
3mm External Width: 44. 6mm Flammability Rating: UL94V-0 For Use With: ETD39 Material: GFR Polyterephthalate No. of Pins: 16. FORMER, ETD39, 16PIN Series: ETD39 Accessory Type: Coil Former External Length / Height: 35.
Usually dispatched within 2-3 business days
Available at Amazon.co.uk
PKE Cutting Edge Wheel Dresser Size 0

Cutting edge - PKE Cutting Edge Wheel Dresser Size 0

29.89
Suitable for wheels up to 20in Minimum 3yr Manufacturer Warranty (Registration Card Included). Cutters have star shaped teeth that expose new grains and thus provide a fresh surface on the wheels. Designed for dressing, truing, sharpening and removing glaze from solid abrasive grinding wheels
Usually dispatched within 4-5 business days
Available at Amazon.co.uk
Cutting-Edge EPCOS PRO-SPEC - B72220S0200K101 - VARISTOR, 18.0J 20VAC - (Pack of 1) --

Pro-10 - Cutting-Edge EPCOS PRO-SPEC - B72220S0200K101 - VARISTOR, 18.0J 20VAC - (Pack of 1) --

7.77
Available in a range of disc diameters from 7mm to 21
Usually dispatched within 2-3 business days
Available at Amazon.co.uk
Cutting-Edge EPCOS PRO-SPEC - B82111EC23 - INDUCTOR, AXIAL, 40UH - (Pack of 1) --

Pro-10 - Cutting-Edge EPCOS PRO-SPEC - B82111EC23 - INDUCTOR, AXIAL, 40UH - (Pack of 1) --

7.77
18ohm Inductance: 40µH Inductance Tolerance: ± 20% ProductRange: EPCOS PRO-SPEC - B82111E Series VHF Chokes Self Resonant Frequency Min: 90MHz Resonant Frequency: 90MHz Voltage Rating V DC: 500V Voltage Rating V AC: 500V Approval Category: VDE 565-2 Body Diameter: 7mm Climatic Category: 55/125/56 C...
Usually dispatched within 2-3 business days
Available at Amazon.co.uk
Cutting-Edge EPCOS PRO-SPEC - B82476A1103M - INDUCTOR, 10UH, 3800MA - (Pack of 1) --

Pro-10 - Cutting-Edge EPCOS PRO-SPEC - B82476A1103M - INDUCTOR, 10UH, 3800MA - (Pack of 1) --

7.77
8A Resonant Frequency: 20MHz Tolerance +: 20% Climatic Category: 40/85/56 Inductance Measurement Frequency: 100kHz Inductor Type: Power Inductor No. 08mm
Usually dispatched within 2-3 weeks
Available at Amazon.co.uk
PKE Cutting Edge GP205/FIQ8 Plastic Blades

Cutting edge - PKE Cutting Edge GP205/FIQ8 Plastic Blades

4.99
Minimum 3yr Manufacturer Warranty (Registration Card Included). Compares to part numbers Flymo FLY012, 5148257-02/4 Black and Decker A6072, A6086 20 in a pack. BLACK and DECKER GX302, 260, 300, 200, 250, 303, GE700, Q5, H5, HX3, T1, GR102, 101, R51, R4, R12 etc
Usually dispatched within 1-2 business days
Available at Amazon.co.uk
PKE Cutting Edge QT028 Plastic Blades Hoversafe

Cutting edge - PKE Cutting Edge QT028 Plastic Blades Hoversafe

17.05
Minimum 3yr Manufacturer Warranty (Registration Card Included). 4V Cordless Article number 532284 Compares to Q02100, Q02151, F016800177, F0161020390 20 in a pack
Usually dispatched within 1-2 business days
Available at Amazon.co.uk
Spectrum SL-Pro Ultimate Diamond Tile Cutting Disc 115 x 22.2mm

Greaves&co - Spectrum SL-Pro Ultimate Diamond Tile Cutting Disc 115 x 22.2mm

44.99
8mm segment height. Cuts all types of tiles; including granite and marble.
Usually dispatched within 24 hours
Available at Amazon.co.uk
Cutting-Edge Dickies Ladies' Redhawk Trousers

Cutting-edge pro spec - Cutting-Edge Dickies Ladies' Redhawk Trousers

18.18
Registration card-Minimum 3year manufacturer's warranty (included). 65% polyester, 35% cotton, 260g/m², leg length 30inches belt loops Pleated front YKK zip Two front pockets One back insert pocket with button fastening.
Usually dispatched within 6-10 business days
Available at Amazon.co.uk
Cutting-Edge Mesh Jointing Tape

Cutting-edge pro spec - Cutting-Edge Mesh Jointing Tape

7.99
An easy to apply 90 metre roll of 48mm wide fibreglass mesh tape for the sturdy reinforcement of all plasterboard joints. - Minimum 3year Manufacturer Warranty (Registration card Included) Pike & Co
Usually dispatched within 1-2 business days
Available at Amazon.co.uk
Cutting-Edge Japanese Nagura Stone

Cutting-edge pro spec - Cutting-Edge Japanese Nagura Stone

11.31
Equivalent of 8,000 gold stone Size: 70 x 20 x 23mm. We proudly serve the Aerospace, Automotive, Construction and DIY industries with great-value tools and equipment imported from all over the world. - Minimum 3year Manufacturer Warranty (Registration card Included) Pike & Co
Usually dispatched within 4-5 business days
Available at Amazon.co.uk
Cutting-Edge Hand Tool Braces [Cleva Edition]

Cutting-edge pro spec - Cutting-Edge Hand Tool Braces [Cleva Edition]

11.95
- Minimum 3year Manufacturer Warranty (Registration card Included) Pike & Co. Heavy duty elasticated braces Wide comfortable straps Leather reinforced cross over Extra strong clips Fully adjustable
Usually dispatched within 1-2 business days
Available at Amazon.co.uk
Cutting-Edge Steel Snap Hook - Pack 4

Cutting-edge pro spec - Cutting-Edge Steel Snap Hook - Pack 4

11.51
We proudly serve the Aerospace, Automotive, Construction and DIY industries with great-value tools and equipment imported from all over the world. Maximum load rating is 34kg Pack of 4. A British owned and operated Tool & Electronics importer and manufacturing company
Usually dispatched within 4-5 business days
Available at Amazon.co.uk
Cutting-Edge Welsh Flag Braces [Cleva Edition]

Cutting-edge pro spec - Cutting-Edge Welsh Flag Braces [Cleva Edition]

10.99
A British owned and operated Tool & Electronics importer and manufacturing company. We proudly serve the Aerospace, Automotive, Construction and DIY industries with great-value tools and equipment imported from all over the world. Ideal for supporting toolbelts
Usually dispatched within 1-2 business days
Available at Amazon.co.uk
Cutting Edge [Pike & Co. Branded] Hand Sanding Pads for Discs - Min 3yr Warranty

Cutting edge - Cutting Edge [Pike & Co. Branded] Hand Sanding Pads for Discs - Min 3yr Warranty

30.09
Design for perfect hand grip, this very Flexible block is ideal for convex and concave surfaces. Profiled yellow hand sanders made from Polyurethane elastomer foam for excellent oil tearing and aging resistance
Usually dispatched within 4-5 business days
Available at Amazon.co.uk
Cutting-Edge 3M - 3505-16 - EJECTOR, SHORT - (Pack of 1) --

Pro-spec 3m - Cutting-Edge 3M - 3505-16 - EJECTOR, SHORT - (Pack of 1) --

7.77
EJECTOR, SHORT Accessory Type: Ejector Latch For Use With: 4600 IDC Flat Cable Plug Connector Connector Type: Hardware Series: 3500 'Further Manufacturer's Details (for this range)Class II.
Usually dispatched within 2-3 business days
Available at Amazon.co.uk
Cutting-Edge 3M - SJ5023BLK - STICK ON FEET - Pack of 36 --

Pro-spec 3m - Cutting-Edge 3M - SJ5023BLK - STICK ON FEET - Pack of 36 --

24.77
6mm External Length / Height: 7. STICK ON FEET Colour: Black External Diameter: 20. 6mm OverallLength: 7. 6mm Internal Diameter: 20. 6mm Pack Quantity: 36 'Further Manufacturer's Details (for this range)A range of durable, non-slip, skid-resistant, polyurethane moulded feet.
Usually dispatched within 2-3 business days
Available at Amazon.co.uk
Cutting-Edge 3M - SJ5312TRNS - STICK ON FEET - Pack of 56 --

Pro-spec 3m - Cutting-Edge 3M - SJ5312TRNS - STICK ON FEET - Pack of 56 --

21.77
STICK ON FEET Colour: Transparent External Diameter: 12. 5mm OverallLength: 3. 7mm External Length / Height: 3. 5mm Pack Quantity: 56 'Further Manufacturer's Details (for this range)A range of durable, non-slip, skid-resistant, polyurethane moulded feet.
Usually dispatched within 2-3 weeks
Available at Amazon.co.uk
Cutting Edge 150mm Dual Action Pad Standard 6+7 Holes [Pike & Co® Branded]- Min 3yr Warranty

Cutting edge - Cutting Edge 150mm Dual Action Pad Standard 6+7 Holes [Pike & Co® Branded]- Min 3yr Warranty

56.49
Dual action super pad for use with random orbit (excenter) sanders, made from super polyurethane with PSA (self stick) fitting
Usually dispatched within 4-5 business days
Available at Amazon.co.uk
Cutting-Edge W.S.P. - KSR5 - SCARAB ROBOT KIT - (Pack of 1) --

Pro-spec w.s.p. - Cutting-Edge W.S.P. - KSR5 - SCARAB ROBOT KIT - (Pack of 1) --

60.77
"Scarab" Robot Kit The Scarab Robot uses 2 touch sensors to detect obstacles Once detected, it will first step back and then perform a two step manoeuvre to avoid the obstacle - this is a combination of Left Turn, Right Turn, Reverse or Stop Can be configured with different sets of movements Comes ...
Usually dispatched within 2-3 weeks
Available at Amazon.co.uk
Cutting Edge 150mm Dual Action Pad Standard - Side Dust No Hole [Pike & Co® Branded]- Min 3yr Warranty

Cutting edge - Cutting Edge 150mm Dual Action Pad Standard - Side Dust No Hole [Pike & Co® Branded]- Min 3yr Warranty

32.29
Medium density, standard profile with extra side dust extraction vents remove more unwanted particles from the sanding area, Max RPM=10,000. Dual action orbital sander pad. Super polyurethane replacement backing pads for random orbital sanders
Usually dispatched within 4-5 business days
Available at Amazon.co.uk
Cutting Edge 150mm Dual Action Pad Standard - 6+1 Hole E80 [Pike & Co® Branded]- Min 3yr Warranty

Cutting edge - Cutting Edge 150mm Dual Action Pad Standard - 6+1 Hole E80 [Pike & Co® Branded]- Min 3yr Warranty

56.49
Super polyurethane replacement backing pads for random orbital sanders. Medium density, standard profile , with ultra tough fibreglass back plate
Usually dispatched within 4-5 business days
Available at Amazon.co.uk
Cutting Edge 150mm Dual Action Pad Standard - 8+1 Hole E120 [Pike & Co® Branded]- Min 3yr Warranty

Cutting edge - Cutting Edge 150mm Dual Action Pad Standard - 8+1 Hole E120 [Pike & Co® Branded]- Min 3yr Warranty

63.09
Super polyurethane replacement backing pads for random orbital sanders. Medium density, standard profile , with ultra tough fibreglass back plate
Usually dispatched within 4-5 business days
Available at Amazon.co.uk
Cutting Edge 150mm Dual Action Pad Thick - No Hole [Pike & Co® Branded]- Min 3yr Warranty

Cutting edge - Cutting Edge 150mm Dual Action Pad Thick - No Hole [Pike & Co® Branded]- Min 3yr Warranty

43.29
Medium density, thick profile with unique straight edge lip. Dual action orbital sander pad. Super polyurethane replacement backing pad for random orbital sanders
Usually dispatched within 4-5 business days
Available at Amazon.co.uk
Cutting Edge 150mm Dual Action Pad Thick - 6 Holes E80 [Pike & Co® Branded]- Min 3yr Warranty

Cutting edge - Cutting Edge 150mm Dual Action Pad Thick - 6 Holes E80 [Pike & Co® Branded]- Min 3yr Warranty

45.49
Size : 150 mm (6 Inch) PSA (self stick) Face 6 Hole E80 5/16 UNF thread. Dual action orbital sander pad. Super polyurethane replacement backing pad for random orbital sanders. Max RPM=10,000. Medium density, thick profile with unique straight edge lip and a 16mm foam kayer
Usually dispatched within 4-5 business days
Available at Amazon.co.uk
Cutting-Edge SPELSBERG PRO-SPEC - T2665400 - FLANGE 21 FRAME GREY - (Pack of 1) --

Pro-10 - Cutting-Edge SPELSBERG PRO-SPEC - T2665400 - FLANGE 21 FRAME GREY - (Pack of 1) --

7.95
FLANGE 21 FRAME GREY 'Further Manufacturer's Details (for this range)CB14081.
Usually dispatched within 24 hours
Available at Amazon.co.uk
Cutting-Edge SPELSBERG PRO-SPEC - T2665408 - INSERT FOR FL21 GREY - (Pack of 1) --

Pro-10 - Cutting-Edge SPELSBERG PRO-SPEC - T2665408 - INSERT FOR FL21 GREY - (Pack of 1) --

8.77
INSERT FOR FL21 GREY 'Further Manufacturer's Details (for this range)CB14081.
Usually dispatched within 1-3 weeks
Available at Amazon.co.uk
Cutting-Edge SPELSBERG PRO-SPEC - T2665413 - INSERT FOR FL21 GREY - (Pack of 1) --

Pro-10 - Cutting-Edge SPELSBERG PRO-SPEC - T2665413 - INSERT FOR FL21 GREY - (Pack of 1) --

7.77
INSERT FOR FL21 GREY 'Further Manufacturer's Details (for this range)CB14081.
Usually dispatched within 1-3 weeks
Available at Amazon.co.uk
Cutting-Edge SPELSBERG PRO-SPEC - T2665415 - INSERT FOR FL13 GREY - (Pack of 1) --

Pro-10 - Cutting-Edge SPELSBERG PRO-SPEC - T2665415 - INSERT FOR FL13 GREY - (Pack of 1) --

7.77
INSERT FOR FL13 GREY 'Further Manufacturer's Details (for this range)CB14085.
Usually dispatched within 1-3 weeks
Available at Amazon.co.uk
Cutting Edge 125mm Dual Action Pad Standard - 8+1 Hole E65 [Pike & Co® Branded]- Min 3yr Warranty

Cutting edge - Cutting Edge 125mm Dual Action Pad Standard - 8+1 Hole E65 [Pike & Co® Branded]- Min 3yr Warranty

47.69
Medium density, standard profile , with ultra tough fibreglass back plate. Surface:Velcro Holes:8 + 1 Holes E65 Thread: 5/16UNF + M8 Max RPM: 10,000 Minimum 3yr Manufacturer Warranty (Registration Card Included). Max RPM=10,000. Made of: Medium Pike & Co
Usually dispatched within 4-5 business days
Available at Amazon.co.uk
Cutting-Edge KAC - 195 - WALL MOUNT SOUNDER - (Pack of 1) --

Pro-spec kac - Cutting-Edge KAC - 195 - WALL MOUNT SOUNDER - (Pack of 1) --

39.77
'Further Manufacturer's Details (for this range)A wall mount sounder, which have been designed to meet EN54-3. With a distinctive low level shape which is acoustically very efficient, providing high output with low current draw
Usually dispatched within 2-3 business days
Available at Amazon.co.uk
Cutting-Edge ELKAY PRO-SPEC - CB02621 - 20mm NYLON CONDUIT - 10m Black - (Pack of 1) --

Pro-10 - Cutting-Edge ELKAY PRO-SPEC - CB02621 - 20mm NYLON CONDUIT - 10m Black - (Pack of 1) --

86.77
20MM NYLON CONDUIT - 10M BLACK 'Further Manufacturer's Details (for this range)Free Flexible Conduit.
Usually dispatched within 2-3 business days
Available at Amazon.co.uk
Cutting-Edge HYLEC PRO-SPEC - 50007LNC - BRASS PG7 IP68 - (Pack of 1) --

Pro-10 - Cutting-Edge HYLEC PRO-SPEC - 50007LNC - BRASS PG7 IP68 - (Pack of 1) --

10.77
5mm Thread Size: PG7 'Further Manufacturer's Details (for this range)Nickel plated brass cable glands with excellent strain relief. BRASS PG7 IP68 Cable Diameter Max: 6.
Usually dispatched within 2-3 business days
Available at Amazon.co.uk
Cutting-Edge HELLERMANN TYTON PRO-SPEC - CTR5 - TERMINAL BAR SUPPORT - Pack of 10 --

Pro-10 - Cutting-Edge HELLERMANN TYTON PRO-SPEC - CTR5 - TERMINAL BAR SUPPORT - Pack of 10 --

13.77
TERMINAL BAR SUPPORT Accessory Type: Terminal Bar Support For Use With: CT3G Wall Mounting Enclosures 'Further Manufacturer's Details (for this range)Consumer Unit Enclosures.
Usually dispatched within 2-3 weeks
Available at Amazon.co.uk
Wolfcraft 8390000 110 x 22.23mm Diamond Cutting Disc Set Segmented and Closed Cutting Edge (2 Pieces)

Wolfcraft - Wolfcraft 8390000 110 x 22.23mm Diamond Cutting Disc Set Segmented and Closed Cutting Edge (2 Pieces)

8.75
;for angle grinders;segmented cutting disc: for cutting bricks, natural stone and quarry tiles;tile cutting disc: for clean cuts in marble, tiles and ceramic tiles;according to EN 13236. The inexpensive alternative - ideal for all beginners and occasional do-it-yourselvers.
Usually dispatched within 24 hours
Available at Amazon.co.uk
Cutting-Edge PANASONIC PRO-SPEC - ELC10D152E - CHOKE, 1500UH, 0.42A, 1R5 - (Pack of 1) --

Pro-10 - Cutting-Edge PANASONIC PRO-SPEC - ELC10D152E - CHOKE, 1500UH, 0.42A, 1R5 - (Pack of 1) --

7.77
CHOKE, 1500UH, 0. 42A Inductor Case Style: Radial Leaded Inductor Type: Choke Coil Lead Spacing: 5mm No. 42A, 1R5 Case Dimensions: 10mm x 15mm DC Resistance Max: 1. 5ohm Inductance: 1
Usually dispatched within 3-5 weeks
Available at Amazon.co.uk
Cutting-Edge PANASONIC PRO-SPEC - ELC12D221E - CHOKE, 220UH, 1.55A, 0R23 - (Pack of 1) --

Pro-10 - Cutting-Edge PANASONIC PRO-SPEC - ELC12D221E - CHOKE, 220UH, 1.55A, 0R23 - (Pack of 1) --

7.77
CHOKE, 220UH, 1. 55A Resonant Frequency: 10kHz CoreMaterial: Ferrite DCCurrent Rating: 1. 23ohm Inductance: 220µH Inductance Tolerance: ± 10% ProductRange: PANASONIC PRO-SPEC - ELC-12D Series RMS Current (Irms): 1
Usually dispatched within 2-3 business days
Available at Amazon.co.uk
Cutting-Edge WURTH ELEKTRONIK PRO-SPEC - 744770115 - CHOKE, SMD, 15UH - (Pack of 1) --

Pro-10 - Cutting-Edge WURTH ELEKTRONIK PRO-SPEC - 744770115 - CHOKE, SMD, 15UH - (Pack of 1) --

9.77
CHOKE, SMD, 15UH Case Dimensions: 12mm x 12mm x 8mm DC Resistance Max: 0. 5MHz Series: WE-PD 'Further Manufacturer's Details (for this range)WE-PD Series. 024ohm Inductor Type: Power No
Usually dispatched within 2-3 weeks
Available at Amazon.co.uk
Cutting-Edge WURTH ELEKTRONIK PRO-SPEC - 744823333 - CHOKE, COMMON MODE, 3.3MH 2.5A - (Pack of 1) --

Pro-10 - Cutting-Edge WURTH ELEKTRONIK PRO-SPEC - 744823333 - CHOKE, COMMON MODE, 3.3MH 2.5A - (Pack of 1) --

12.77
3MH 2. 3mH ProductRange: WURTH ELEKTRONIK PRO-SPEC - WE-CMB Series Rated Current: 2. 06ohm Inductance Tolerance: ± 30% Inductor Case Style: S Inductor Type: Common Mode No. 5A DC Resistance Max: 0. CHOKE, COMMON MODE, 3. 5A DCCurrent Rating: 2. 5A DC Current Max: 2. 5A Inductance: 3
Usually dispatched within 3-5 weeks
Available at Amazon.co.uk
Cutting-Edge WURTH ELEKTRONIK PRO-SPEC - 744842932 - CHOKE, COMMON MODE, 32UH, 8.5A - (Pack of 1) --

Pro-10 - Cutting-Edge WURTH ELEKTRONIK PRO-SPEC - 744842932 - CHOKE, COMMON MODE, 32UH, 8.5A - (Pack of 1) --

15.77
5A CoreMaterial: Nickel Zinc DC Current Max: 8. CHOKE, COMMON MODE, 32UH, 8. 5A DC Resistance Max: 5500µohm Inductance Tolerance: ± 30% Inductor Case Style: S Inductor Type: Common Mode No. of Pins: 4 Series: WE-CMB NiZn 'Further Manufacturer's Details (for this range)WE-CMB Series
Usually dispatched within 1-3 weeks
Available at Amazon.co.uk
Cutting Edge [Pike & Co. Branded] 115mm x 50m A203 Aluminium Oxide Rolls - Min 3yr Warranty

Cutting edge - Cutting Edge [Pike & Co. Branded] 115mm x 50m A203 Aluminium Oxide Rolls - Min 3yr Warranty

63.09
Minimum 3yr Manufacturer Warranty (Registration Card Included).
Usually dispatched within 4-5 business days
Available at Amazon.co.uk
Cutting Edge Bottle Gas Spanner [Pike & Co® Branded]- Min 3yr Warranty

Cutting edge - Cutting Edge Bottle Gas Spanner [Pike & Co® Branded]- Min 3yr Warranty

17.59
Quality spanner for connecting bottled gas Minimum 3yr Manufacturer Warranty (Registration Card Included).
Usually dispatched within 4-5 business days
Available at Amazon.co.uk
Cutting Edge Spindle Pads - Velcro Hard Face [Pike & Co® Branded]- Min 3yr Warranty

Cutting edge - Cutting Edge Spindle Pads - Velcro Hard Face [Pike & Co® Branded]- Min 3yr Warranty

23.49
Minimum 3yr Manufacturer Warranty (Registration Card Included).
Usually dispatched within 4-5 business days
Available at Amazon.co.uk
Cutting Edge [Pike & Co. Branded] Hook On Nipples - Min 3yr Warranty

Cutting edge - Cutting Edge [Pike & Co. Branded] Hook On Nipples - Min 3yr Warranty

12.49
Minimum 3yr Manufacturer Warranty (Registration Card Included). Hook-on grease nipple. Thread 1/8in BSP.
Usually dispatched within 4-5 business days
Available at Amazon.co.uk
Cutting Edge [Pike & Co. Branded] Professional Sealant Gun 310ml - Min 3yr Warranty

Cutting edge - Cutting Edge [Pike & Co. Branded] Professional Sealant Gun 310ml - Min 3yr Warranty

19.11
Sturdy skeleton gun with hexagonal rod and re-inforced ring. Minimum 3yr Manufacturer Warranty (Registration Card Included).
Usually dispatched within 4-5 business days
Available at Amazon.co.uk
Cutting-Edge EPCOS PRO-SPEC - B66358G0200X187 - FERRITE CORE, HALF, GAPPED, ETD29 - (Pack of 1) --

Pro-10 - Cutting-Edge EPCOS PRO-SPEC - B66358G0200X187 - FERRITE CORE, HALF, GAPPED, ETD29 - (Pack of 1) --

7.77
FERRITE CORE, HALF, GAPPED, ETD29 Ae Effective Cross Section Area: 76mm² Core Size: ETD29 Effective Magnetic PathLength: 70. 4mm Inductance Factor Al: 383nH Material Grade: N87 Series: B66358.
Usually dispatched within 2-3 business days
Available at Amazon.co.uk
Cutting-Edge EPCOS PRO-SPEC - B66361G0000X187 - FERRITE CORE, HALF, ETD34, N87 - (Pack of 1) --

Pro-10 - Cutting-Edge EPCOS PRO-SPEC - B66361G0000X187 - FERRITE CORE, HALF, ETD34, N87 - (Pack of 1) --

7.77
FERRITE CORE, HALF, ETD34, N87 Ae Effective Cross Section Area: 97. 6mm Inductance Factor Al: 2600nH Material Grade: N87 Series: B66361. 1mm² Core Size: ETD34 Effective Magnetic PathLength: 78.
Usually dispatched within 3-5 weeks
Available at Amazon.co.uk
Cutting-Edge EPCOS PRO-SPEC - B66417U0160K187 - FERRITE CORE, HALF, GAPPED, EFD20 - (Pack of 1) --

Pro-10 - Cutting-Edge EPCOS PRO-SPEC - B66417U0160K187 - FERRITE CORE, HALF, GAPPED, EFD20 - (Pack of 1) --

7.77
FERRITE CORE, HALF, GAPPED, EFD20 Ae Effective Cross Section Area: 31mm² Core Size: EFD20 Effective Magnetic PathLength: 47mm Inductance Factor Al: 160nH Material Grade: N87 Series: B66417 'Further Manufacturer's Details (for this range)Material Grade N87.
Usually dispatched within 2-3 business days
Available at Amazon.co.uk
Cutting-Edge ELKAY PRO-SPEC - CB02623 - 12mm STEEL CONDUIT - 10m - (Pack of 1) --

Pro-10 - Cutting-Edge ELKAY PRO-SPEC - CB02623 - 12mm STEEL CONDUIT - 10m - (Pack of 1) --

57.77
12MM STEEL CONDUIT - 10M 'Further Manufacturer's Details (for this range)Supplied in 10m lengths Galvanised steel, low fire hazard High mechanical strength Ideal for use in dry internal installations Light and flexible Approved to BSEN50086, CE.
Usually dispatched within 2-3 business days
Available at Amazon.co.uk
Cutting-Edge ELKAY PRO-SPEC - CB02636 - M20 PLAIN HOLE FITTING - (Pack of 1) --

Pro-10 - Cutting-Edge ELKAY PRO-SPEC - CB02636 - M20 PLAIN HOLE FITTING - (Pack of 1) --

12.77
M20 PLAIN HOLE FITTING Thread Size: M20 'Further Manufacturer's Details (for this range)High mechanical strength IP40 Rated Straight fitting, Smooth entry bush Suitable for locking conduit into plain holes in enclosures Ideal for use in industrial and commercial applications Approved to BSEN50086, ...
Usually dispatched within 2-3 business days
Available at Amazon.co.uk
Cutting-Edge EPCOS PRO-SPEC - B66417G0000X187 - FERRITE CORE, HALF, EFD20 - (Pack of 1) --

Pro-10 - Cutting-Edge EPCOS PRO-SPEC - B66417G0000X187 - FERRITE CORE, HALF, EFD20 - (Pack of 1) --

7.77
4mm 'Further Manufacturer's Details (for this range)Material Grade N87. FERRITE CORE, HALF, EFD20 Ae Effective Cross Section Area: 31mm² Core Size: EFD20 Core Type: EFD Effective Magnetic PathLength: 47mm Inductance Factor Al: 1200nH Material Grade: N87 Series: EFD External Depth: 6
Usually dispatched within 2-3 business days
Available at Amazon.co.uk
Cutting-Edge HYLEC PRO-SPEC - 50.216 ES - LOCKNUT M16 STAINLESS STEEL - (Pack of 1) --

Pro-10 - Cutting-Edge HYLEC PRO-SPEC - 50.216 ES - LOCKNUT M16 STAINLESS STEEL - (Pack of 1) --

12.77
LOCKNUT M16 STAINLESS STEEL Locknut Plating: - Material: Stainless Steel Thickness: 2. 8mm Thread Size - Imperial: - Thread Size - Metric: M16 AF Size - Metric: 19mm Accessory Type: Hexagonal Locknut For Use With: Cables MSL: -.
Usually dispatched within 1-3 weeks
Available at Amazon.co.uk
Cutting-Edge HYLEC PRO-SPEC - 50009PALNC - GREY IP68 PG9 GLAND - (Pack of 1) --

Pro-10 - Cutting-Edge HYLEC PRO-SPEC - 50009PALNC - GREY IP68 PG9 GLAND - (Pack of 1) --

7.77
GREY IP68 PG9 GLAND Cable Diameter Max: 8mm Thread Size: PG9 'Further Manufacturer's Details (for this range)Polyamide watertight cable glands which are easy to assemble and offer a wide clamping range.
Usually dispatched within 2-3 business days
Available at Amazon.co.uk
Cutting Edge [Pike & Co. Branded] Self Adhesive Red PSA 150mm Discs - Min 3yr Warranty

Cutting edge - Cutting Edge [Pike & Co. Branded] Self Adhesive Red PSA 150mm Discs - Min 3yr Warranty

43.29
E-Weight Aluminium oxide disc for universal sanding on most materials. 60 Grit Minimum 3yr Manufacturer Warranty (Registration Card Included). Normally used in conjunction with a powered horizontal disc sanders.
Usually dispatched within 4-5 business days
Available at Amazon.co.uk
Cutting Edge Locknuts [Pike & Co® Branded]- Min 3yr Warranty

Cutting edge - Cutting Edge Locknuts [Pike & Co® Branded]- Min 3yr Warranty

19.09
Quality locknut for attaching resin fibre discs to backing pads. Quality locknut for attaching resin fibre discs to backing pads 20115 (115mm) Type A2 - Thread M14 X 2 - Spanner 24060 (Red) 24065 (Fork) Minimum 3yr Manufacturer Warranty (Registration Card Included).
Usually dispatched within 4-5 business days
Available at Amazon.co.uk
Cutting-Edge EPCOS PRO-SPEC - B82464A4154K - INDUCTOR, POWER, 10X10, 150UH - (Pack of 1) --

Pro-10 - Cutting-Edge EPCOS PRO-SPEC - B82464A4154K - INDUCTOR, POWER, 10X10, 150UH - (Pack of 1) --

8.77
1MHz Inductor Type: Power Inductor No. INDUCTOR, POWER, 10X10, 150UH Case Dimensions: 10. 4mm x 4. 8mm External Width: 10mm Inductance Measurement Frequency: 0. 4mm x 10
Usually dispatched within 2-3 weeks
Available at Amazon.co.uk
Cutting Edge Perforated Sanding Discs 125mm [Pike & Co® Branded]- Min 3yr Warranty

Cutting edge - Cutting Edge Perforated Sanding Discs 125mm [Pike & Co® Branded]- Min 3yr Warranty

19.09
Minimum 3yr Manufacturer Warranty (Registration Card Included). Size 125mm. Pack of 5 Extra Coarse - 40 Grit. Nylon loop backed discs for maximum life.
Usually dispatched within 4-5 business days
Available at Amazon.co.uk
Cutting-Edge Tecnica Trakka Linear Cutting Guide - [Pike & Co.® Branded] w/Min 3yr Warranty

Cutting-edge pro spec - Cutting-Edge Tecnica Trakka Linear Cutting Guide - [Pike & Co.® Branded] w/Min 3yr Warranty

594.68
A portable, quick and simple guide, perfect for use in accurately cutting straight lines in sheet materials with the Tecnica Plasma 34 cutter. Will work with most plasma cutters
Usually dispatched within 3-5 weeks
Available at Amazon.co.uk
Cutting-Edge COOPER BUSSMANN PRO-SPEC - 160MT - FUSE, HRC, HIGH SPEED, 160A - (Pack of 1) --

Pro-10 - Cutting-Edge COOPER BUSSMANN PRO-SPEC - 160MT - FUSE, HRC, HIGH SPEED, 160A - (Pack of 1) --

53.77
FUSE, HRC, HIGH SPEED, 160A Fuse Current: 160A HRC Fuse Case Style: Stud Mount Series: - Voltage Rating V AC: 690V Voltage Rating V DC: 500V Blow Characteristic: High Speed Fuse Size Code: MT Fuse Size Held: MT Fuse Type Blowing Characteristic: High Speed I2t @ 415V: 15000s I2t @ 660V: 25000s I²t P...
Usually dispatched within 2-3 weeks
Available at Amazon.co.uk
Cutting-Edge COOPER BUSSMANN PRO-SPEC - AA016A - FUSE, HRC AAO 16A - (Pack of 1) --

Pro-10 - Cutting-Edge COOPER BUSSMANN PRO-SPEC - AA016A - FUSE, HRC AAO 16A - (Pack of 1) --

13.77
8mm x 88mm, A2 Fuse Type Blowing Characteristic: Motor Rated 'Further Manufacturer's Details (for this range)NITD. FUSE, HRC AAO 16A Fuse Current: 16A HRC Fuse Case Style: Bolted Tag Series: AAO Voltage Rating V AC: 550V Blow Characteristic: aM Body Diameter: 13
Usually dispatched within 2-3 business days
Available at Amazon.co.uk
Cutting-Edge COOPER BUSSMANN PRO-SPEC - NITD10A - FUSE, HRC, 10A - (Pack of 1) --

Pro-10 - Cutting-Edge COOPER BUSSMANN PRO-SPEC - NITD10A - FUSE, HRC, 10A - (Pack of 1) --

10.77
8mm x 55mm, A1 Fuse Type Blowing Characteristic: Motor Rated 'Further Manufacturer's Details (for this range)NITD. 5mm Fixing Centres: 44. 8mm Breaking Capacity Current AC: 80kA External Length / Height: 54
Usually dispatched within 2-3 business days
Available at Amazon.co.uk
Cutting-Edge ELKAY PRO-SPEC - CB02616 - 20mm CONDUIT CONTRACTOR PACK Black - (Pack of 1) --

Pro-10 - Cutting-Edge ELKAY PRO-SPEC - CB02616 - 20mm CONDUIT CONTRACTOR PACK Black - (Pack of 1) --

105.77
20MM CONDUIT CONTRACTOR PACK BLACK 'Further Manufacturer's Details (for this range)Superb quality, lightweight nylon corrugated conduit One piece fitting Crush Resistant IP66 Rated LFH â" Low fire hazard, zero halogen Kit consists of - 10m conduit, 10 x metric fittings with locknuts Convenient, eas...
Usually dispatched within 2-3 business days
Available at Amazon.co.uk
Cutting-Edge COOPER BUSSMANN PRO-SPEC - C14G40 - FUSE, 40A, 14X51, 500V - (Pack of 1) --

Pro-10 - Cutting-Edge COOPER BUSSMANN PRO-SPEC - C14G40 - FUSE, 40A, 14X51, 500V - (Pack of 1) --

8.77
FUSE, 40A, 14X51, 500V Blow Characteristic: gG Fuse BodyMaterial: - Fuse Current: 40A Fuse Size Imperial: 0
Usually dispatched within 2-3 business days
Available at Amazon.co.uk
Cutting-Edge SPELSBERG PRO-SPEC - 200-405 - ENCLOSURE, PC, IP67, 124X122X55MM - (Pack of 1) --

Pro-10 - Cutting-Edge SPELSBERG PRO-SPEC - 200-405 - ENCLOSURE, PC, IP67, 124X122X55MM - (Pack of 1) --

42.77
17" External Height - Metric: 55mm External Width - Imperial: 488" External Width - Metric: 124mm IP Rating: IP67 NEMA Rating: - 'Further Manufacturer's Details (for this range)Model: TG Series A range of high quality designed multi-purpose enclosures
Usually dispatched within 2-3 weeks
Available at Amazon.co.uk
Cutting-Edge ELKAY PRO-SPEC - 241/69/79B - CABLE GLAND - (Pack of 1) --

Pro-10 - Cutting-Edge ELKAY PRO-SPEC - 241/69/79B - CABLE GLAND - (Pack of 1) --

7.77
CABLE GLAND Cable Diameter Max: 7mm For Use With: Cables Need to Pass Through Sealed Enclosures or Panels Material: Nylon 6
Usually dispatched within 2-3 business days
Available at Amazon.co.uk
Cutting-Edge HYLEC PRO-SPEC - 50.220 PASW - NYLON LOCKNUT Black M20 - (Pack of 1) --

Pro-10 - Cutting-Edge HYLEC PRO-SPEC - 50.220 PASW - NYLON LOCKNUT Black M20 - (Pack of 1) --

7.77
Their rugged construction makes them ideally suitable for many hazardous applications in both gas and dust hazard environments
Usually dispatched within 3-5 weeks
Available at Amazon.co.uk
Cutting-Edge SPELSBERG PRO-SPEC - 186-004 - MOUNTING PLATE, 91X73X2.5MM - (Pack of 1) --

Pro-10 - Cutting-Edge SPELSBERG PRO-SPEC - 186-004 - MOUNTING PLATE, 91X73X2.5MM - (Pack of 1) --

12.77
MOUNTING PLATE, 91X73X2. 5MM Accessory Type: Mounting Plate For Use With: Enclosures Body Colour: Grey EnclosureMaterial: Phenolic Paper Enclosure Type: Multipurpose External Depth - Imperial: 2. 87" External Depth - Metric: 73mm External Height - Imperial: 0. 1" External Height - Metric: 2
Usually dispatched within 2-3 business days
Available at Amazon.co.uk
Cutting-Edge ELKAY PRO-SPEC - CB02652 - PG13.50 CABLE GLAND WITH L/NUT Black - (Pack of 1) --

Pro-10 - Cutting-Edge ELKAY PRO-SPEC - CB02652 - PG13.50 CABLE GLAND WITH L/NUT Black - (Pack of 1) --

7.77
5 'Further Manufacturer's Details (for this range)IP68 protection Polymide 6, Halogen free Supplied complete with locknut Available in grey, white, black and red PG thread Improved cable sealing and retention Integral claw design prevents cable twisting during installation Suitable for insertion in...
Usually dispatched within 1-3 weeks
Available at Amazon.co.uk
Cutting-Edge ELKAY PRO-SPEC - CB02659 - M20 CABLE GLAND WITH LOCKNUT RED - (Pack of 1) --

Pro-10 - Cutting-Edge ELKAY PRO-SPEC - CB02659 - M20 CABLE GLAND WITH LOCKNUT RED - (Pack of 1) --

7.77
M20 CABLE GLAND WITH LOCKNUT RED Cable Diameter Max: 14mm Thread Size: M20 'Further Manufacturer's Details (for this range)IP68 protection Polymide 6, Halogen free Supplied complete with locknut Available in grey, white, black and red Metric thread Improved cable sealing and retention Integral claw...
Usually dispatched within 2-3 business days
Available at Amazon.co.uk
Cutting-Edge ELKAY PRO-SPEC - CB02686 - M12 CABLE GLAND WITH LOCKNUT GREY - (Pack of 1) --

Pro-10 - Cutting-Edge ELKAY PRO-SPEC - CB02686 - M12 CABLE GLAND WITH LOCKNUT GREY - (Pack of 1) --

7.77
M12 CABLE GLAND WITH LOCKNUT GREY Cable Diameter Max: 6
Usually dispatched within 1-3 weeks
Available at Amazon.co.uk
Cutting-Edge ELKAY PRO-SPEC - CB02690 - M25 CABLE GLAND WITH LOCKNUT GREY - (Pack of 1) --

Pro-10 - Cutting-Edge ELKAY PRO-SPEC - CB02690 - M25 CABLE GLAND WITH LOCKNUT GREY - (Pack of 1) --

7.77
M25 CABLE GLAND WITH LOCKNUT GREY Cable Diameter Max: 18mm Thread Size: M25 'Further Manufacturer's Details (for this range)IP68 protection Polymide 6, Halogen free Supplied complete with locknut Available in grey, white, black and red Metric thread Improved cable sealing and retention Integral cla...
Usually dispatched within 1-3 weeks
Available at Amazon.co.uk